When is one needed? High quality and durable sliding door, aluminum glass doors LABEL are the best solution. Designed to be used both indoors and outdoors, these entrances with aluminum frame and glass doors They let light pass through but are an effective barrier against noise and help maintain a constant temperature, ensuring comfort and energy efficiency.
Movable door
Fixed door
Glass thickness
35 mm
35 mm
stratified 44.2 EN 14449
stratified 55.2 EN 14449
Insulating from 28 mm EN 1279-5
Tempered monolithic from 8 and 10 mm EN 12150-2
Movable door
Fixed door
Fixed frame
Glass thickness
35 mm
35 mm
50 mm
Layered 44.2 EN 14449
Layered 55.2 EN 14449
Insulating from 28 mm EN 1279-5
Tempered monolithic from 8 and 10 mm EN 12150-2
Movable door
Fixed door
Glass thickness
35 mm
35 mm
Layered 44.2 EN 14449
Layered 55.2 EN 14449
Insulating from 28 mm EN 1279-5
Tempered monolithic from 8 and 10 mm EN 12150-2
Movable door
Fixed door
Fixed frame
Glass thickness
35 mm
35 mm
50 mm
Layered 44.2 EN 14449
Layered 55.2 EN 14449
Insulating from 28 mm EN 1279-5
Tempered monolithic from 8 and 10 mm EN 12150-2
Glass doors with aluminum frame LB35 can be supplied with or without glazing. They can be purchased as Catalog components, window frames unspun or window frames assembled.
Maximum height of compartment 3000 mm
Width of compartment (mm)
Door weight (Kg)
Eterna 90-150
Single door
÷ 700 2000
200
Double door
÷ 1200 3000
150
Revolus 90
Single door
700 ÷ 2000
130
Double door
÷ 1200 2800
90
Revolus 150
Single door
700 ÷ 2000
200
Double door
÷ 1200 3000
150
Eterna - Revolus T
2 telescopic doors
1000 ÷ 3000
150 x 2 doors
4 telescopic doors
1700 ÷ 4250
75 x 4 doors
Why choose a certified and tested door?
Choose a certified and tested product is essential to ensure that you have chosen a safe, efficient and long-lasting door. Key elements such as the air permeability, The water tightness, The wind load resistance e Shock greatly influence the performance of a window frame and contribute to the energy improvement of a building.
To ensure high quality standards, it is essential to choose products that comply with specific regulations and subjected to resistance test which certify their performance in terms of insulation, safety and reliability.
The profiles LABEL LB35 comply with the following regulations: RPN337534 – RPN 379618 – RPN 379620
EN1026 - EN12207
EN1027 - EN12208
EN12211 - EN12210
EN 13049
RTN 378576 Validation of thermal transmittance calculations carried out by the customer for the purposes of CE marking of the product in compliance with regulation 305/2011/EU, with reference to the harmonised standard UNI EN 14351-1:2016.
The treatments are carried out in full compliance with the EN ISO 7599 Standard “Anodizing of aluminum and its two alloys. General specifications for the anodic oxide layer”, performed on profiles pre-treated superficially by micro-shot peening or chemical satin finishing.
The oxide thickness is 15 microns with hot dip fixing.
The treatments are carried out in full compliance with the EN 12206-1 Standard “Coatings of aluminium and aluminium alloys for architectural applications
– Part 1: Coatings prepared from thermosetting powder materials”.
The powders used are based on TGIC-free polyester resins in Class 1; the minimum thickness of a coating layer is 60 microns measured according to the ISO 2360 standard.
Looking for one glass door with aluminum frame modern and safe? Contact us and we will recommend the best sliding door for your project
